Product Details:
Payment & Shipping Terms:
|
| Inner Diameter: | 28mm Or 30mm | Outner Diameter: | 62mm |
|---|---|---|---|
| Length: | 40inch |
Melt Blown PP Sediment Filter Cartridge PP Melt Blown Filter Cartridge parameters:
| Name |
40'' Melt Blown PP Spun Sediment Filter For Mining Industry and Water Filtration |
| Length | 40 inch =1016mm or 1000mm |
| Inner diameter | 28mm or 30mm |
| Outer diameter | 62mm |
| Weight | 440g |
| Function | pre-filter use in the filter hosings to remove sediment ,iron trust and hair. |
| Processing flow | 1000L/H |
| Replacement time | 6 months |
| Maximum differential pressure | 3 kg f/cm² |
| Maximum operating temperature | 5-80°c |
Melt Blown PP Sediment Filter Cartridge PP Melt Blown Filter Cartridge introduction:
PP melt blown filter cartridge (PPF) is made from polypropylene material. It can remove
suspendedsubstances, particles and rust effectively. This cartridge usually works as the
prefiltration to protectthe behind filtration for water treatment system. Special cartridges
can be customized.
Features:
• Three layers structure cartridge offers high dirt holding capacity,longer service life
• Formed by thermal bond without using any binders and adhesives
• 100% Pure Polypropylene will not cause any pollution to water
• Wide Chemical compatibility
• All kinds of adaptors are available
• FDA compliance material
Applications:
PP filter cartridge is mainly used in the field of water purification, Beverage, foodstuff, Chemical, Pharmaceutical, electronics, environmental protection etc.
PP filter cartridegs:
1,internal diameter:28/30mm
2,External diameter:62mm
3,Length: 5"10"20"30"40"50"60"
PP Filter Element
1. Brief Introduction:
PP filter element adopts polypropylene particles and is formed through heating, melting and spinning. PP filter element has even aperture and a deep filtration structure which is loose outside and dense inside, and has high filtration efficiency and good acid and alkali-resistance property, and impurities such as suspension substances, particles, iron scale and the like in liquid can be effectively removed.
2. Characteristics:
The filtration precision is high, the pressure loss is small, the flow is big, the dirt holding capacity is big, the service life is long, and the product is tasteless and odorless and does not have secondary pollution.
3. Usage:
The product can be widely used in filtering liquid in the industries such as pure water, electroplating solution, printed circuit board, solvent, dope, washing agent, medical water, oral solution, pharmaceutical injection solution, drinks, wine and the like, and can be used in filtering compressed air and gas.
4. Specification: (special specifications can be ordered)
| Length | 5” | 10” | 20” | 30” | 40” | 50” | 60” |
| Outer Diameter (+-1mm) | 60-115 mm | ||||||
| Inner Diameter (+-1mm) | 28-30 mm | ||||||
5. Performance:
a. Precision and Flow
| Filtration Precision (mum) | 1 | 3 | 5 | 10 | 20 | 30 | 50 |
|
Initial Precision (mum)
|
10-15 | 15-25 | 25-35 | 30-40 | 35-50 | 40-60 | 60-90 |
| Maximum Granule(mum) | 15 | 25 | 35 | 40 | 50 | 60 | 90 |
| Flow (L/min) | 10 | 14 | 17 | 20 | 24 | 28 |
32 |
sediment water purifier introductions:
1. This pp melt blown filter caritridge is the embossing surface type ,which can remove impurity clearly because of its strong assimilative capality .It can remove sand sediment ,iron rust ,hair and other impurity in water .
2. Typical applications for the polypropylene filter (also
known as a PP filter) include under sink filtration,
whole house filtration, potable water, food service,
beverages, reverse osmosis prefiltration, fine chemicals,
light industrial uses (electronics, plating solutions,
etc), and more.
