Product Details:
Payment & Shipping Terms:
|
| Material: | Pp Membrane | Color: | White |
|---|---|---|---|
| Length: | 10inch ,20inch,30inch,40inch |
5 Micron Polypropylene Membrane PP Pleated Water Filter Cartridge
pleated fitler cartridge introduction:
The filtration media of PP micropore filter cartridge is superfine PP fibre membrane. It is a fixed and depth filter cartridge with a wide range of pore size from 0.1um to 20um, the materials comply with FDA related requirements. It is the first choice of pre-filtration due to its unique low differential pressure, high flow rate and long service life feature. The structure of PP has stable performance and wide chemical compatibility.
the nylon pp pleated filter cartridge is made of pp membrane not pp,so it can filter more impurity than pp filter cartrdige because of its high micron accuracy. this pp pleated filter cartridge is usually used into hospital and anyother more quality requirement products.
nylon pp pleated filter cartridge parameters:
| Outside diameter | 2.7"(69mm) |
| Length | 9.75", 10", 20", 30", 40" |
| Filter media | PP |
| Support/Drainage | PP |
| Cage/Core/End cap | PP |
| Seal material | Silicone, EPDM, NBR, Viton, Teflon, E-FKM |
| Removal rating | 0.1μm, 0.22μm, 0.45μm, 1μm, 3μm, 5μm, 10μm, 20μm, 50μm |
| Maximum operating temperature | 80℃@1Bar, support adaptors are recommended for temperature exceeds 50℃ |
| Maximum operating differential pressure | 4.0Bar, normal temperature |
| Maximum operating differential pressure (reverse direction) | 2.0Bar normal temperature |
| Sterilization temperature time | 5times, 20minute cycles at 120℃ |
| Material | Membrane: | pp membrane |
| Core: | PP | |
| Support layer: | PP | |
| sealing method: | Thermal bonding | |
| O ring/Gasket: | PP | |
| Specifications | Pore size(um): | 0.1,0.2,0.45,0.65…..Micron |
| Outer Diameter(OD): | 69mm (can be decided by client) | |
| Length(inch): | 5” 10", 20", 30", 40"(can be decided by client) | |
| Technical data | Max differential pressure: | Forward-70psi (4.8 bar) at 25°C Reverse-40 psi(2.7bar) at 25 °C |
| Recommended change out: | 1.5bar | |
| Max temperature: | 80°C | |
| Sterilization | 20times,30 minutes cycles @121°C |
nylon pp pleated filter cartridge shows:
222+Triangular tip ends:
222+fans ends :
226+Triangular tip ends:
226+fans ends :
